Status Notifier — Setup Guide
Status Notifier logo
Smart Presence Light

Get Started

Plug it in, install the app, sign in — your light follows your status automatically. Most people are up and running in under two minutes.

Works on macOS & Windows  ·  Models hwA (USB) & hwB (USB + Bluetooth)

1 What's in the box

Three parts. That's everything you need.

1 · Light bar + stand 2 · Controller box 3 · USB-A → USB-C cable
Figure 1 — Box contents
Which model do you have? It's printed on your box label. hwA is USB-only; hwB adds Bluetooth. USB setup is identical for both.

2 How it connects

Computer → controller → light bar. One cable does it all.

Computer USB-A Controller USB-C Light bar
Figure 2 — Computer → controller → light bar

3 Set it up (USB)

Six quick steps.

  1. Place the light bar where others can see it. Sit it in the weighted stand at the edge of your desk or on a shelf.
  2. Plug USB-C into the bottom of the light bar.
  3. Plug USB-A into a USB port on your computer. The light flashes once to show it has power.
  4. Install the app and sign in. See Download the app below.
  5. Confirm "Connected" in the app, then pick your platform under Dashboard → Status Source.
  6. Done. The light now follows your status, refreshing about every 30 seconds.
Tip: Use a USB port on the computer itself, not an unpowered hub, for steady power.

4 Download the app

One link for both Windows and Mac — open it on your computer and it gives you the right download for your operating system.

Download the app →

Download · install · sign in to activate your light. Free and paid plans are available — you can upgrade any time from Account in the app.

5 Pick your status source

Tell the app which app your status should follow.

In the app

Open Dashboard → Status Source and choose your platform. Sign in when prompted — the app connects securely and never sees your password.

Compatible with your workflow

Status Notifier reads your presence from the status apps you already use for work and calls. Switch sources any time from the same menu.
Not seeing an update right away? Auto-sync runs about every 30 seconds. Click Refresh for an instant update.

6 What the colors mean

At a glance, from across the room.

Green — AvailableYou're free.
Red — Busy / Meeting / DNDDon't interrupt.
Amber — AwayStepped out or idle.
Off / Gray — OfflineNot signed in.

Prefer your own palette? Customize colors in LED Settings, or use Manual mode to set a color yourself.

7 The controller buttons

Reset BT 1/FLS BT 2 USB-C
ButtonFunction
ResetRestarts the controller if the light stops responding.
BT 1/FLShwB — Bluetooth pairing (slot 1) / flash mode.
BT 2hwB — Pairs a second Bluetooth device (slot 2).

On hwA the Bluetooth buttons are inactive.

8 Optional — Bluetooth pairing (hwB only)

  1. Keep the controller powered by USB.
  2. Press BT 1/FLS to start pairing. Use BT 2 for a second device.
  3. In the app, open Devices and select the light.

9 Troubleshooting

ProblemTry this
Light won't turn onReseat both cable ends. Use a computer USB port (not a hub). Press Reset.
App says "No device"Check USB-A is in the computer and USB-C in the light. Unplug, wait 5 seconds, replug.
Color doesn't match statusDashboard → Status Source: confirm the platform, then click Refresh.
Slow to updateAuto-sync runs about every 30 seconds. Use Refresh for instant.
Bluetooth won't pair (hwB)Press BT 1/FLS again. Keep USB connected while pairing.
Still stuckPress Reset and reconnect, then contact support.

10 Safety & care

Indoor use only. Keep the device and cable dry and away from heat. Don't cover the light while in use. Use only the supplied cable. No user-serviceable parts inside — do not open the controller. Keep small parts away from children.

✉ Support & warranty

We're here if you need us.

Email info@ghtechland.com
Web www.ghtechland.com
App www.ghtechland.com/ghtl-tswa